QVI Fusion is an innovative multisensor measurement system that combines a unique large field-of-view (LFOV) optical system with available touch probe, laser and micro sensors to form a uniquely productive metrology system. QVI Fusion 350 is ideal for measuring 2D parts. With its large measuring area and dual magnification optics, Fusion 350 can easily accommodate large parts or groups of smaller parts, and handle both large and small feature sizes. QVI Fusion 400 is a high-performance multisensor system offering dual optical paths for instant switching between large field and high zoom imaging. Fusion 400 is fully multisensor-capable with available touch trigger probe, SP25 continuous contact scanning probe, and patented on-axis TeleStar® Plus interferometric TTL laser.

Measuring range 350x250x250mm

XY Area Accuracy as low as E2=1.8+4L/1000)μm, Z Accuracy as low as E1=(2.0+5L/1000)μm

SmartScope® Flash™ systems are the best choice in automatic general purpose dimensional measurement. A high quality, 12:1 zoom lens calibrates itself at every magnification change for consistent measurement accuracy. Innovative solid state illumination sources, color camera, and ZONE3® 3D CAD based metrology software make every Flash model a powerful video measuring system. Every Flash model is multisensor capable, supporting touch probe, laser scanner, and micro-probes.

Sizes ranging from 200x200x150mm to 1500x1500x200mm. Extended Z-axis up to 400mm available on some models.

XY Area Accuracy as low as E2=(1.8+5L/1000)μm, Z Accuracy as low as E1=(2.0+8L/1000)μm

SmartScope ZIP® builds upon its strength as an international favorite in video measurement by offering new members of the product line. The ZIP Advance models are specially configured for the toughest applications. The Lite models provide ZIP benefits in value configurations. All ZIP models excel at video measurement, multisensor versatility for highest productivity and come standard with a motorized zoom lens that autocalibrates with every magnification change. Available contact and non-contact probes deploy and retract under program control for fully automatic operation.

Sizes ranging from 300x150x200mm to 800x820x200mm. Extended Z-axis up to 300mm available on some models.

XY Area Accuracy as low as E2=(1.5+5L/1000)μm, Z Accuracy as low as E1=(1.3+5L/1000)μm

SmartScope® SP systems are designed for optimum scanning probe performance. Starting with a rigid base structure, the system mechanics are designed to optimize dynamic data acquisition critical to scanning probe performance. SmartScope SP optics combine a wide field objective lens, optical zoom, and 5 megapixel monochrome digital camera, providing a distortion free 16mm diagonal field of view at low zoom, with high resolution at high zoom. Careful design of both optics and illumination sources ensure accurate imaging at all zoom levels. The optional TeleStar Plus laser offers very long working distance with sub-micron resolution. The on-axis and through-the-lens design allows laser measurement over the full measuring range of the system.

Sizes ranging from 300x300x250mm to 650x660x300mm.

XY Area Accuracy as low as E2=(1.5+5L/1000)μm, Z Accuracy as low as E1=(3.8 + 5L/1000)μm

SmartScope® Quest systems are high-accuracy metrology systems designed to use a variety of sensors for full three-dimensional measurement. Accurate video measurements require accurate images, and Quest offers the best optical performance available. The patented TeleStar® 10:1 zoom lens is completely telecentric and automatically calibrated throughout its range for distortion free, high-fidelity images – perfect for high-accuracy metrological applications. Pair any SmartScope Quest or Vantage with QVI® ZONE3® 3D CAD based metrology software.

Sizes ranging from 300x150x200mm to 790x815x250 mm. Extended Z-axis up to 400mm available on some models.

XY Area Accuracy as low as E2=(1.0+4L/1000)μm, Z Accuracy as low as E1=(1.5+5L/1000)μm

ZONE3® Metrology Software represents a totally new way of working with multisensor measurement systems. Its interface clearly displays relationships between parts, sensors, datum alignments, and machine tooling. ZONE3 uses CAD models and other innovative features to automatically and effortlessly generate measurement routines. The software is now available in four different versions.